Electrical Specifications
Encoder Type:	Absolute Magnetic
Resolution:	210 (1024) points per revolution
Supply Voltage:	12 Vdc min. to 18 Vdc max. or 20 Vdc min. to 28 Vdc max.
Typical Current Consumption:	40 mA @ 20mA output current
Output Current:	0 – 20 mA or 4 – 20 mA
Accuracy:	+/- 0,2% of full scale
Output Format:	Full range output over one revolution (360°) or over one half revolution (180°)
Current Sense Resistor:	Max. 400Ω – recommended 250Ω
Output Update Rate:	2610 updates/sec. ~ 383μsec. per update
Electrical Protection:	Reverse polarity and output short circuit protected
Noise Immunity:	Tested to EN61000-6-2 : 2005 (industrial environments) Electromagnetic compatibility (EMC) and EN 61000-6-3 : 2007 (residential, commercial, and light-industrial environments) for Electromagnetic compatibility (EMC)

Mechanical Specifications
Material:	Housing: Aluminum Cap: Aluminum Hollow Shaft: stainless steel (AISI 303)
Weight:	Encoder: ~ 715 gr (25,2 oz) Cable: 50 gr / meter (1,76 oz / meter)
Bearing Life:	> 1.9 x 10¹⁰ revolutions at rated load
Shaft Speed:	3 000 rpm (max.)
Starting Torque:	< 0,1 Nm (14,2 oz-in) at 25° C
Mass Moment of Inertia:	40 gcm² (5,7 x 10-4 oz-in-sec²)
Shaft Loads:	Axial: 250 N (56 lbs) max. Radial: 500 N (112 lbs) max.

Environmental Specifications
Operating Temp.:	-40° to +85° C
Storage Temp.:	-40° to +85° C
Shock:	100 G / 11 ms
Vibration:	10-2000 Hz / 10 G
Bump:	10 G / 16 ms (1000 x 3 axis)
Humidity:	98 % RH without condensation
IP Rating:	IP 65 / Nema 4 (approx.)

Connection Options
Cable:	8 leads (0,05 mm2, 30 AWG) - Differential 5 leads (0,14 mm2, 26 AWG) - Standard twisted pairs; shielded