Worm Gear Series RD

As high-performance gears for general mechanical and plant engineering, small designed worm gears guarantee a long service life. High quality materials, continuously optimized manufacturing methods and modern design comply with today's state of the art in every aspect. The housing is made out of aluminum.
 
There are currently 3 design sizes with transmission up to 1:40 available. The self-locking worm gears have efficiency levels between 50% and 70 %, depending on the transmission. They are maintenance-free under normal operational conditions. Exact positioning is only one task among many other which can be done with low clearance angular gears. Handling devices, feeding facilities, piston pump drives, printing machines etc. are further fields of application for these special gears.
 
The standard circumferential backlash on the drive shaft of theses gears - depending on size and transmission - ranges between 0.5° and 0.2°. Depending on the requirements, the gears can also be delivered with almost no clearance. Low clearance can be maintained over a long lifetime if the device is accurately dimensioned.
As high-performance gears for general mechanical and plant engineering, small designed worm gears guarantee a long service life. High quality materials, continuously optimized manufacturing... read more »
Close window
Worm Gear Series RD
As high-performance gears for general mechanical and plant engineering, small designed worm gears guarantee a long service life. High quality materials, continuously optimized manufacturing methods and modern design comply with today's state of the art in every aspect. The housing is made out of aluminum.
 
There are currently 3 design sizes with transmission up to 1:40 available. The self-locking worm gears have efficiency levels between 50% and 70 %, depending on the transmission. They are maintenance-free under normal operational conditions. Exact positioning is only one task among many other which can be done with low clearance angular gears. Handling devices, feeding facilities, piston pump drives, printing machines etc. are further fields of application for these special gears.
 
The standard circumferential backlash on the drive shaft of theses gears - depending on size and transmission - ranges between 0.5° and 0.2°. Depending on the requirements, the gears can also be delivered with almost no clearance. Low clearance can be maintained over a long lifetime if the device is accurately dimensioned.
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
RIght Angle Gear reducer RIght Angle Gear reducer
 

                                                

Drehzahl, max. Drehmoment Übersetzung Dimension Ausführungen
Welle
5000 1/min 3Nm 1:1; 1:2; 1:3; 1:4; 1:5; 1:7,5; 1:10; 1:12,5; 1:15; 1:25; 1:30 ab 26x26x42mm D:3, D:5, D:8 und D:10mm
 
 
Right Angle Gear Reducer RD40 Right Angle Gear Reducer RD40
 

                                                

Drehzahl, max. Drehmoment Übersetzung Dimension Ausführungen
Welle
5000 1/min 3Nm 1:1; 1:2; 1:3; 1:4; 1:7,5; 1:10; 1:12,5; 1:15; 1:25; 1:30, 1:40 40x40x56mm Hohl/Vollwelle:      D:8 und D:10mm
 
 
Right ANgle Gear Reducer WD50 Right ANgle Gear Reducer WD50
 

                                                

Drehzahl, max. Drehmoment Übersetzung Dimension Ausführungen
Welle
5000 1/min 10Nm 1:1; 1:2,5; 1:5 1:7,5; 1:10; 1:12,5; 1:15; 1:25; 1:30 50x50x74mm Hohl/Vollwelle:      D:14
 
 
Viewed
Top

We´re here to help.

Matthias_Willmann

Your contact

Matthias Willmann
m.willmann@willtec.de
07665 - 93465-36